ICP DAS PMC-523x/PMC-224x/PMD Series User Manual
156
appear as follow:
Figure10-7 :
SMS Setting Page (2)
iv
Input name in the “Name” field and you could also input the
description of this SMS Alarm in the “Description” field.
v
In the “Phone Number” section, click on “Add’’ to input the phone
numbers
t
o receive the SMS Alarm messages. The SMS can be sent
to multiple receivers. Keep on clicking “Add” to add all phone
numbers to receive the Alarm message, click “Remove” to remove
the phone numbers you want to delete.
vi
Enter the content in the “Message” field. If the Unicode mode is
adopted, the length of the content cannot exceed 70 characters. If the
Unicode mode is not selected (will support English characters only),
the length of the content limit is 160 characters. SMS Alarm
provides an encoded string for you to add current I/O channel data,
power data or Internal Register data into SMS Alarm message. To
make it easy to add the encoded string, PMC provides “Real-time
variable editor”. Please refer to “
” for more
detailed information of the “Real-time variable editor”.
vii
Click on “OK” to confirm the setting and leave the setting page.
viii
Repeat steps iii~vii to complete settings of all SMS Alarm setting.
Summary of Contents for PMC-523 Series
Page 1: ...ICP DAS PMC 523x PMC 224x PMD Power Meter Concentrator Series User Manual Version 3 2 4...
Page 165: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 150 Figure9 14 The Import of MQTT Topic...
Page 205: ...ICP DAS PMC 523x PMC 224x PMD Series User Manual 190 Figure10 53 PUE Setting Page 2...
