ICP DAS USA PISO-1730U, User Manual

Page: 27 / 38

PISO-1730U Card
32-ch Optically Isolated DIO Board (Sink, NPN)
User Manual/ Ver. 1.2/ Jan. 2015/ PMH-0025-11/ Page: 26
6. I/O Control Register
6.1 How to Find the I/O Address
The plug&play BIOS will assign a proper I/O address to every PIO/PISO series card in the
power-on stage. The fixed IDs for the PISO-1730U card are given as follows:
Table 6-1:
PISO-1730U (Rev 1.0 )
Vendor ID 0xE159 Sub-Vendor ID 0x4280
Device ID 0x0001 Sub-Device ID 0x0000
Sub-Aux ID 0x0020
The PIO_PISO.EXE utility program will detect and present all information for PIO/PISO cards
installed in the PC, as shown in the following Figure6-1. Details of how to identify the
PISO-1730U card of ICPDAS data acquisition boards based on the
Sub-vendor ,
Sub-device and Sub-Aux ID are given in Table 6-1.
The PIO_PISO.exe utility is located
on the CD as below and is useful
for all PIO/PISO series cards.
(CD:\NAPDOS\PCI\Utility\Win32\PI
O_PISO\)
http://ftp.icpdas.com/pub/cd/iocar
d/pci/napdos/pci/utility/win32/pio_
piso/
Figure 6-1