PET-AR400 User Manual
V1.0.0
P.32
3.1.
Continuous Acquisition
The Continuous Acquisition Mode is triggered by software command.
In continuous acquisition mode with software command triggering, when the PC sends a start
command to the PET-AR400, the module will begin to gather data. Once the data accumulates to a
certain size, it will be sent back to the PC. The data collection process will continue until the PC
sends a stop command or until the desired amount of data has been collected.
In
Continuous Acquisition
Mode, the following parameters need to be specified:
Channels
：
Select the number of channel to be enabled.
Trigger
：
Select
Software Start
as the trigger type.
Sample Rate
：
Specify a value of the sample rate from 0 to 128000.
Sample Count
：
Specify a value of the target sample from 0 to 15000000. 0 means keep collecting
data until stop command is received.
