M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
99
2.44 ~AA5PPSS
Description:
This command is used to set the Digital Output power-on value and the Digital
Output safe value for a specified module to either active or inactive.
Syntax:
~AA5PPSS[CHKSUM](CR)
~
Delimiter character
AA
The address of the module to be set in hexadecimal format (00 to FF)
5
The command to set the Digital Output power-on value and the Digital
Output safe value
PP
A two-digit hexadecimal value representing the status of the Digital
Output power-on value, where bit 0 corresponds to Digital Output
channel 0, and bit 1 corresponds to Digital Output channel 1, etc.
When the bit is 0, it denotes that the Digital Output power-on is
inactive, and 1 denotes that the Digital Output power-on is active.
SS
A two-digit hexadecimal value representing the status of the Digital
Output safe value, where bit 0 corresponds to Digital Output channel
0, and bit 1 corresponds to Digital Output channel 1, etc. When the bit
is 0, it denotes that the Digital Output safe value is inactive, and 1
denotes that the Digital Output safe value is active.
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Note:
Neither the Digital Output power-on value nor the Digital Output safe value has
any effect on Digital Output channels that are associated with alarm outputs.
Examples:
Command: ~0150102
Response: !01
Sets the Digital Output power-on value for module 01 to 01 indicating that
the power-on value for Digital Output channel 0 is active and is inactive
for all others channels, and sets the Digital Output safe value to 02
indicating that the safe value for Digital Output channel 1 is active and is
inactive for all others channels, and returns a response indicating that the
command was successful.
Command: ~014
Response: !010102
Summary of Contents for M-7026
