M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
95
2.42 ~AA4N
Description:
This command is used to read the safe value for Analog Output channel N of a
specified module.
Syntax:
~AA4N[CHKSUM](CR)
~
Delimiter character
AA
The address of the module to be read in hexadecimal format (00 to
FF)
4
The command to read the Analog Output safe value
N
The Analog Output channel to be read, zero based (0-1)
Response:
Valid Command:
!AA(Data)[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
(Data)
The Analog Output safe value. See Section 1.9.5 for details of the
data format.
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Examples:
Command: #010+06.000
Response: >
Sets the Analog Output value for Analog Output channel 0 of module 01
to +06.000 (+6.0 V) and returns a response indicating that the command
was successful
Command: ~0150
Response: !01
Sets the current Analog Output value for Analog Output channel 0 of
module 01 as the Analog Output safe value and returns a response
indicating that the command was successful.
Command: ~0140
Response: !01+06.000
Reads the Analog Output safe value for Analog Output channel 0 of
module 01 and returns a response indicating that the command was
successful, with a value of +06.000 (+6.0 V).
Command: ~014F
Response: ?01
Attempts to read the Analog Output safe value for Analog Output channel
15 of module 01, but returns a response indicating that the command was
unsuccessful because Analog Output channel 15 does not exist.
Summary of Contents for M-7026
