M-7026
M-7026 User Manual Rev: 1.5 Date: 2016/03/10
52
2.13 $AA4N
Description:
This command is used to store the current Analog Output value as the
power-on value for Analog Output channel N of a specified module.
Syntax:
$AA4N[CHKSUM](CR)
$
Delimiter character
AA
The address of the module to be set in hexadecimal format (00 to FF)
4
The command to store the current Analog Output value as the
power-on value
N
The Analog Output channel to be set, zero based (0-1)
Response:
Valid Command:
!AA[CHKSUM](CR)
Invalid Command:
?AA[CHKSUM](CR)
!
Delimiter character to indicate a valid command
?
Delimiter character to indicate an invalid command
AA
The address of the responding module in hexadecimal format (00 to
FF)
There will be no response if the command syntax is incorrect, there is a
communication error, or there is no module with the specified address.
Note:
The #AAN(Data) command must be sent before this command is used.
Examples:
Command: #012+00.000
Response: >
Sets the output value for Analog Output channel 2 of module 01 to
+00.000 (+0.0 V) and returns a response indicating that the command
was successful.
Command: $0142
Response: !01
Stores the current Analog Output value as the power-on value for Analog
Output channel 2 of module 01 and returns a response indicating that the
command was successful. The power-on value for Analog Output
channel 2 is set to 0.0 V immediately.
Command: $014F
Response: ?01
Attempts to store the power-on value for Analog Output channel 15 of
module 01 and returns a response indicating that the command was
unsuccessful because Analog Output channel 15 does not exist.
Related Commands:
Section 2.5 #AAN(Data), Section 2.19 $AA7N
Summary of Contents for M-7026
