AM335X-PAC Series User Manual version 2.0.1 Page: 39
Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
2.6. LAN1/LAN2 Network Connection
The user can use
‘
ifconfig
’
command to get the IP address of LAN1/LAN2 and the SSH client
software (Putty or others) to connect the LinPAC AM335x PAC.
Step 1: Using
‘
ifconfig
’
command to check the IP address of LAN1/2.
(Refer to the Figure 2.6-1)
Figure 2.6-1.
Typing ‘ifconfig’
command to check the IP address
Step 2: User can use SSH client
software (Putty or others)
to connect the LinPAC.
(Refer to the Figure 2.6-2)
Figure 2.6-2.
Using ‘Putty’
utility to connect the LinPAC