ICP DAS USA ISaGRAF WinCE ViewPAC, User Manual

Page: 34 / 192

ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
2-2
2.1 Step 1 - Installing The ISaGRAF Software
The user has to install two software before he can program the ISaGRAF ViewPAC controller system.
They are
A. ISaGRAF Workbench &
B. ICP DAS Utilities For ISaGRAF
User has to purchase at least one pcs. of ISaGRAF (Ver. 3.4x or Ver. 3.5x ISaGRAF-256-E or
ISaGRAF-256-C or ISaGRAF-32-E or ISaGRAF-32-C) to install on his PC to edit, download, monitor &
debug the controller system. Item (B) is free and it is burned inside the CD-ROM which is delivered with
the ISaGRAF WinCE ViewPAC controllers.
Operating system Requirements:
One of the following computer operating systems must be installed on the target computer system
before you can install the ISaGRAF Workbench software program.

Windows 98, Windows 2000 or Windows XP

Windows NT Version 3.51 or Windows NT Version 4.0

Windows XP or Vista or Windows 7 (refer to FAQ-117 or 2.1.4 )
Steps To Install The ISaGRAF Workbench:
If your PC OS is Windows Vista or Windows 7 (32-bit), refer to 2.1.4 .
If your PC OS is Windows 7 (64-bit), please refer to 2.1.5 .
1. Insert the ISaGRAF Workbench CD into your CD-ROM drive.
If your computer does not auto-start the installation, use the Windows Explorer and go to the
CD-ROM drive where the Workbench CD is installed.
2. Double-click on the
"install.bat" file listed on the
ISaGRAF CD.
If the "install.bat" file is not
found on your ISaGRAF CD,
then double-click on the
"ISaGRAF.exe" file to start the
installation process.
3. To begin the ISaGRAF 3.x software program,
click the Windows [Start] button, then click
[Programs], and you should see the ISaGRAF
program group as illustrated below. Click
“Projects” can start ISaGRAF software.
Select the language. Recommend to
use “English” because this manual
uses English version.