VP-2117 Getting Started,
Apr. 2010, V1.0
3-7
3.7 Connecting PC to the VP-2117 Ethernet Port
The VP-2117 controller systems feature a built-in Ethernet Port. You can use
Ethernet to connect with the PC. Before you can download an ISaGRAF application
to the VP-2117 controller via Ethernet, you must correctly setup the communication
parameters of Ethernet. (Please refer to
to setup IP, Mask and Gateway
address)
On your PC:
Please open an ISaGRAF project and select the program you want to download to
the VP-2117 controller, and then press the
Dz
Link Setup
dz
button on the project
screen as shown below.
A
Dz
PC-PLC Link Parameters
dz
dialog box will appear as shown below. From here,
please enter the NET-ID and select the
Dz
Ethernet
dz
communication options then click
on the
Dz
Setup
dz
button.
Once you have clicked on the
Dz
Setup
dz
button, an
Dz
Ethernet Link Parameters
dz
dialog
box will appear. Set the
Dz
Port Number
dz
to
Dz
502
dz
and enter the IP address of the
VP-2117
controller, please refer to
2
3
1
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
