VP-2117 Getting Started, Apr. 2010, V1.0
2-1
Chapter 2 Installing Software
2.1 Step 1 - Installing the ISaGRAF Software
The user needs to install the following two kinds of software before he can program
the VP-2117 controller system. They are
A. ISaGRAF Workbench
B. ICP DAS Utilities for ISaGRAF
User has to purchase at least one pcs. of ISaGRAF Workbench (Ver. 3.4x or Ver.
3.5x ISaGRAF-256-E or ISaGRAF-256-C or ISaGRAF-32-E or ISaGRAF-32-C) to
install on his PC to edit, download, monitor & debug the controller system. Item (B)
is free and it is burned inside the CD-ROM which is delivered with the VP-2117.
Operating system Requirements:
One of the following computer operating systems must be installed on the target
computer system before you can install the ISaGRAF Workbench software
program.
Windows 95 / Windows 98 / Windows 2000
Windows NT Version 3.51 or Windows NT Version 4.0
Windows XP or Vista or Windows 7 (Please refer to
> FAQ > Software >ISaGRAF Ver.3 > FAQ117)
Steps to Installing the ISaGRAF Workbench:
Insert the ISaGRAF Workbench CD into your CD-ROM drive. If your computer does
not have the auto-start feature active, use the Windows Explorer and go to the
CD-ROM drive where the Workbench CD is installed, then double-click on the
Dz
install.bat
dz
file listed on the ISaGRAF CD. If the
Dz
install.bat
dz
file is not found on
your ISaGRAF CD, then double-click on the
Dz
ISaGRAF.exe
dz
file to start the
installation process.
Select the language. Recommend
to use "English" because this
manual uses English version.
ГК
Атлант
Инжиниринг
–
официальный
представитель
в
РФ
и
СНГ
+7(495)109-02-08 [email protected] www.bbrc.ru
