iNS-308 User Manual
Copyright
©
2022 ICP DAS CO., Ltd. All Rights Reserved.
- 12 -
3.
Getting Started
This chapter provides a basic overview of how to configure and operate the iNS-300 series module.
3.1
Connecting the Power and the Host PC
Step 1: Connect both the iNS-300 series module and the Host PC to the same sub network.
Ensure that the network settings on the Host PC have been correctly configured and are functioning
normally. Ensure that the Windows firewall or any Anti-Virus firewall is properly configured to allow
incoming connections, or temporarily disable these functions, otherwise the
“Search Servers”
function in the eSearch Utility described in
Section 3.3“Configuring the Network Settings”
perform as expected. Contact the System Administrator for instructions of how to do this.
Step 2: Apply power (+24 ~ +57 V
DC
) to the iNS-308.