ICP DAS USA iCAM-760D, User Manual, Page: 71 / 96

Chapter 4
iCAM-7
60D User’s Manual ICP DAS
Setup

71
4.4.2 Video Tab
The Video tabbed pane sets the video recording trigger method.
The Video recording trigger methods:
1. Schedule
2. Period
3. Motion
4. GPIO Input
The settings about the Video event triggered
1.
Recoding Length :
2. Time Lapse :
3. Target : defining the video record file target destination.

Schedule: This method activates the Camera video surveillance/recording
operation continuously when the defined days of the week and set
time of the set days are met. Motion is ignored with this method.
Recording Length : Each recording time-span is in accordance with
the setting value of the Recording Length (in seconds).
Target: The video record is stored in the SD card, Remote Disk as
selected or through both of them.