Getting Started:
PAC-5007(P)/5107(P)/5207/5307 Ver. 1.0, 07/2010 ICP DAS
.
3-3
3.3 Connect Your PC to Ethernet Port
The Ethernet port of the μPAC-5x07(P) PAC provides Modbus TCP/IP Slave protocol. It
can be used to connect to the PC or HMI software. Up to
6
PC/HMI can talk to one
μPAC-5x07(P) at the same time through the Ethernet port.
Before you can download an ISaGRAF application to the μPAC-5x07(P) PAC using the
Ethernet port, you must first setup the Ethernet port to properly communicate with the
host PC.
μPAC-5x07(P):
Set IP address, Mask and Gateway. Please refer to
PC:
First open an ISaGRAF project and select a program you wish to communicate between
your PC and the μPAC-5x07(P) PAC system. Next, click on "Link Setup" button in the
project screen as shown below.
A "PC-PLC Link Parameters" dialog box will appear as shown below. Select the
"Ethernet" communications option and click on "Setup" button.
μPAC-5x07(P)
Port No. = 502
Ethernet
Industrial Ethernet Switch
NS-205/208(PSE)
PC / HMI
Summary of Contents for I-8417
Page 46: ......
