ICP DAS USA I-8017 Series, User Manual, Page: 30 / 93

I-8017/I-9017 Series I/O Module User Manual V3.0.3 P.30
2.2. Windows-based Controllers
2.2.1. Basic Function
Basic function can be used to retrieve configuration information and verify the AI reading function.
Basic information includes:

Version number and published date of the library.

FPGA version.

Single-ended/Differential jumper settings.

Gain and offset values for each input range.

Data reading of each channel.
The following steps take pac_i8017HW_Basic_Info.exe as example and display the information of
I-8017HW.
Step 1: Please refer to the “Wire Connections”, connect a stable signal source (such as a battery)
to I-8017HW
Tips & Warnings
1. Unused channels should be connected to GND to avoid floating.
2. A battery output should provide a stable enough signal.
3. A 125 Ohm resistor is required when measuring current input.