P8
“SP”:
CAN/CAN FD arbitration/data phase bit rate
sample point. Suggested range: 75.00 ~ 87.50 %
2.
In order to use the “User-Defined CAN Baud Rate Settings”
paramters, user need to set the pin7 of “10-pin dip switch” to
ON position. Otherwise, the CAN “Arbitration Bit Rate” and
“Data Phase Bit Rate” settings will follow according to “10-pin
dip switch” settings.
Step 5: Setting CAN filter ID
1.
The “Reject Remote Frame” is used to reject remote
standard/extended CAN frame. And the “Standard ID/Extended
ID” field are used to set accepted standard/extended CAN IDs.
2.
All settings in the “CAN Filter Setting” will take effect after
pressing “Re-Init CAN” button.
