ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
-84 -
3.
Click the
“Pair
” tab to display the I/O Pair-connection Settings page.
Pull Mode
4.
In the “I/O Pair-connection Settings”, select
“PULL”
from the “
Mode
” drop-down options.
5.
Enter the
IP address for ET-2260 #2 module
in the “
Remote IP
” field.
6.
Enter the
TCP Port for ET-2260#2 module
in the “
Remote Port
” field.
7.
Enter a
DI Count Value for ET-2260 #2 module
in the “
DI Count
” field (Remote DI to Local DO).
The following is an example of a
Pull mode
configuration:
Enter
“2”
in the
“DI Count”
field. This means
DI x2 of ET-2260 #2 module
is mapped to
DO x2 of
ET-2260 #1 module
.
8.
Click the “
Submit
” button to complete the configuration.
Figure 5-1.5
Figure 5-1.4
