ICP DAS USA ET-2200 Series User Manual Download Page 125

Page: 125 / 125

ET-2200 Series Ethernet I/O Modules

-125 -

Appendix B: Revision History

This chapter provides revision

history information to this document.

The table below shows the revision history.

Revision

Date

Description

1.0.0

Sep. 2015

Initial issue

1.1.0

Nov. 2015

Added the software and hardware information about the ET-2242,

ET-2251 and ET-2255.

1.1.3

Feb. 2016

Added the software and hardware information about the
ET-2254P, ET-2261 and ET-2268.

Updated the information about the Firmware Version v1.3.9

[Jan.20, 2016] in Chapter 4 Web Configuration.

1.2.0

Jul. 2017

Added the software and hardware information about the

ET-2242U and ET-2255U.

Updated the information about the Firmware Version v1.4.6

[Jun.16, 2017] in Chapter 4 Web Configuration.

Added Chapter Appendix A:Troubleshooting.

Added Chapter Appendix B: Revision History.

1.3.0

Jun. 2018

Added the hardware information about the ET-2261-16.

1.4.0

Sep. 2019

Added the information of MQTT function.

1.5.0

Jun. 2020

Modify the official website related links.

Summary of Contents for ET-2200 Series























































































































Search results

Summary of Contents for ET-2200 Series

Reviews:

Brands by name

Popular brands

ICP DAS USA ET-2200 Series, User Manual

Search results

Summary of Contents for ET-2200 Series

Reviews:

Brands by name

Popular brands