ECAT-2011H EtherCAT Slave I/O module
Copyright © 2019 ICP DAS CO., Ltd. All Rights Reserved.
-
25 -
AD Input Type Selection(ECAT-2011H/2012H)
The ECAT-2011H/2012H provides 8-channel of differential inputs or 16-channel single-ended inputs.
The factory default settings is differentail input
. Refer to the following instructions for details of
how to change the Analog Input type.
In the left-hand window, click the
“Box 1
(ECAT-201xH 16S.E./8Diff Ch. Ana.)”
itme.
In the right-hand window,
click the
“CoE – Online”
tab.
Double-click
the
“Index
8000:09 (Analog input type)”
to open the
“Set Value Dialog”
box.
Figure 3-3.3
Figure 3-3.4
Figure 3-3.5
