ICP DAS USA ECAT-2011H, User Manual

Page: 31 / 35

ECAT-2011H EtherCAT Slave I/O module
Copyright © 2018 ICP DAS CO., Ltd. All Rights Reserved. - 31 -
Index 80n0 AI Settings
(for 0 ≤ n ≤ F)
Index Name Meaning Data type Flags Default
80n0:00 AI Settings Maximum subindex UINT8 RW 0x1A(26dec)
80n0:01 Enalbe user scale User scale is active BOOLEAN RW FALSE(0dec)
80n0:02 Presentation
Change the method of representation
of the measured value.
0: Signed presentation
( Refer to Table 4-2-1 below )
1: Unsigned presentation
( Refer to Table 4-2-2 below )
2: Absolute value with MSB as sign
Signed amount representation
(
Refer to Table 4-2-3 below )
Bit3 RW Signed(0dec)
80n0:05 Enable Channel Enable Channel BOOLEAN RW TRUE(1dec)
80n0:06 Enalbe filter
Enable filter, which makes
PLC-cycle-synchronous
data exchange unnecessary
BOOLEAN RW FALSE(0dec)
80n0:07 Enable limit 1 Limit 1 enable BOOLEAN RW FALSE(0dec)
80n0:08 Enalbe limit 2 Limit 2 enable BOOLEAN RW FALSE(0dec)
80n0:09 Analog input type
0: Differential input
1: Single-ended input
NIT32 RW Differential (0dec)
80n0:0A Enalbe user calibration Enabling of the user calibration BOOLEAN RO FALSE(0dec)
80n0:0B
Enalbe vendor
calibration
Enabling of the vendor calibration BOOLEAN RW TRUE(1dec)
80n0:0E Swap limit bits
Swap limit bits
FALSE:
0: not active
1: value < limit value
2: value > limit value
3: value is equal to the limit value
TRUE:
0: not active
1: value < limit value
2: value > limit value
3: value is equal to the limit value
BOOLEAN RW FALSE(0dec)