manualshive.com logo in svg

ICP DAS USA DL-301, User Manual, Page: 8 / 124

Share
Download
ICP DAS USA DL-301 User Manual Download Page 8

 

DL-300 Data Logger User Manual      Version 1.1.0    Aug. 2015 

                                              - 4 - 

 

Data Logging Software

 

The DL300 Utility can be used to configure the modules, monitor real-time data and 

show the run chart, log alarm events, group DL-300 modules so that the status of 

distribution groups can be viewed and managed. The utility also allows the log data 

to be downloaded and exported to a .CSV file that can then be imported into any 

industry-standard software or spread sheet for analysis.       

 

 
 

 

Easy integration with SCADA software 

 

Modbus is one of the most popular protocols used in the industrial world.   

Supporting traditional serial protocols of RS-485 and Ethernet protocols allow the 

DL-300 series well-integrated into the HMI/SCADA systems. 

 

Alarm 

DL-300 series allows users to set high alarm level for CO/CO

2

/

 

Temperature/Humidity/Dew Point and low alarm level for 

Temperature/Humidity/Dew Point, and to enable/disable the alarm functions. An 

Alarm LED indicator on the front of the DL-300 module will flash when an alarm 

event is activated, and a relay output related to all alarm events can be use to tap 

an alarm light/sound or control the IAQ devices such as ventilators, air cleaners, 

and filters. Beep alarm is available when the CO/CO

2

 high level alarm occurs. 

 

. 

 

Summary of Contents for DL-301





























































































































Reviews:

No comments