Mio X-Series User Guide
Page 19
Appendix A: Software Installation
Software should be installed on your computer before using your mioX device. Complete full-
featured mioX operation relies on three different software components:
•
Software (USB MIDI) device drivers
•
RTP/Network MIDI support
•
Auracle for X-Series
configuration software
Full-Featured Operation
MacOS Users
MacOS full-featured installs are easy. The first two components are built into MacOS! The third
component,
Auracle for X-Series
software, must be downloaded from the iConnectivity web
page and installed on your computer. Be sure to download the
MacOS version specifically.
Windows Users
For full-featured Windows use, none of the three components are built-in; however, the
installation is still easy. Merely download the Windows version of
Auracle for X-Series
software from the iConnectivity web site
page and run the installer. The
Auracle for X-Series
installer will install all three components onto your computer.
Basic USB MIDI Interface Operation
In order to unleash the full power of your mioX (including but not limited to firmware updates,
MIDI routing and filtering, and RTP/Network MIDI), we strongly recommend that you install all
three software components listed above. However, some users may want to run their mioX as
a simple USB MIDI interface with no advanced functionality.
MacOS Users
For basic USB MIDI interface operation, MacOS users merely connect the mioX device to their
computer
’s USB port and start playing.
Windows Users
For basic USB MIDI interface operation, Windows users download and install the latest version
of our Unified Windows Driver from the iConnectivity web site
