20
56. Wrap the Press Cable (69) around a 90mm
Pulley (39). Attach the Pulley, two Half Finger
Guards (42), a Small Cable Trap (48), and an
M10 Washer (116) to the Left Upright (5) with an
M10 x 108mm Bolt (99), an M10 Washer (116),
and an M10 Nylon Locknut (114).
Make sure the
Cable Trap and Finger Guards are oriented as
shown.
57. Wrap the Press Cable (69) around a 90mm
Pulley (39). Attach the Pulley, two Half Finger
Guards (42), a Small Cable Trap (48), and an
M10 Washer (116) to the Press Frame (13) with
an M10 x 135mm Bolt (98).
Make sure the Cable
Trap and Finger Guards are oriented as
shown.
58. Wrap the Press Cable (69) around a “V”-pulley
(40). Attach the “V”-pulley, two Half Finger Guards
(42), a Cable Trap (49), and an M10 Washer
(116) to the Left Upright (5) with an M10 x 68mm
Bolt (93) and an M10 Nylon Locknut (114).
Make
sure the Cable Trap and Finger Guards are
oriented as shown.
59. Wrap the Press Cable (69) around a 90mm
Pulley (39). Attach the Pulley, two Half Finger
Guards (42), a Small Cable Trap (48), and an
M10 Washer (116) to the Press Frame (13) with
the M10 x 135mm Bolt (98) used in step 57 and
an M10 Nylon Locknut (114).
Make sure the
Cable Trap and Finger Guards are oriented as
shown.
60. Wrap the Press Cable (69) under a 90mm Pulley
(39). Attach the Pulley, two M10 Washers (116),
and two Half Finger Guards (42) to the Left Base
(2) with an M10 x 52mm Bolt (102) and an M10
Nylon Locknut (114).
Make sure the Finger
Guards are oriented as shown.
56
99
5
42
69
39
48
42
116
116
114
57
42
98
42
48
39
69
13
116
58
42
42
5
40
49
114
69
93
116
59
98
13
42
42
48
114
39
116
60
2
42
42
69
114
116
116
102
39
