ICON ProCon D300 Series, Operating Manual

Page: 9 / 28

D300 Series Operating Manual
9 ◀◀
|
Menu Structure
Press [MENU] key to enter programming mode:
If the monitor prompts you to enter the calibration security password, press the or key to set the calibration security password, and
then press the [ENT] key to confirm the calibration security password. No initial password here, please enter directly by pressing the
[ENT] key.
Item Display Selection Sub Menu
Measurement
Electrode
pH
ORP
Temperature
Type
NTC2.252 kΩ
NTC10 kΩ
Pt100
Pt1000 (Default)
Offset 0.00 (Default)
Input
Automatic (Default)
Manual
N/A
Unit
°C (Default)
°F
Calibration
S-S-C
(Standard solution
calibration pH)
pH
pH 2 points 4/6/9
pH 3 points 4/6/9
pH 2 points 4/7/10
pH 3 points 4/7/10
S-S-C query
(Standard solution
calibration query pH)
Offset 1
Slope 1
Offset 2
Slope 2
On-site calibration Offset Adjustment 1
On-site query
Linear
Offset
S-S-C
(Standard solution
calibration ORP)
ORP S-P (single point)
S-S-C
(Standard solution
calibration ORP)
ORP slope
On-site calibration
On-site query Offset
Linear