ICON ProAudio PlatformNano Air, User Manual

Page: 45 / 49

45
Restore the factory default settings
To restore your PlatformNano Air settings to factory default, simply launch iMap and
import the original setting (i. e. without making any changes) to the device by the
following steps.
1. Connect PlatformNano Air with the provided USB cable and launch iMap software.
2. Click the “Connect” button and select “PlatformNano Air” as the MIDI input and
output device.
Note: If PlatformNano Air does not appear on the pull down menu, select USB
audio as the MIDI I/O device.
3. Click “Send Data” to upload the setting to your PlatformNano Air.
4. Close iMap, and then turn the PlatformNano Air power of off & on again.