7
Front Panel Layout
1. Backlit LED touch faders to control DAW’s channel faders
The touch faders could be used to adjust the parameter of different channels. At
Mackie control /HUI mode, press the two “Track or Bank (5)” shifting buttons to
shift between channels.
Tip:
You could set your touch faders to “instant” or “gradual” mode with the
provided iMap software
2. Backlit LED touch faders to control DAW’s master fader
The touch fader can be used to adjust the parameter of the master channel.
3. Dual function encoders
The dual functioned encoder acting as a push-button and a rotary control.
4. Control buttons
REC buttons
Activate and deactivate the recording state of the
associated channel. The switch will light red when the
channel is armed.
MUTE buttons
Activate and deactivate the mute state of the associated
channel. The switch will light red when the channel is
muted.
SOLO buttons
Turn On and Off the solo state of the associated channel.
The switch will light red when the channel solo state is on
and other channels will be muted. You could solo multiple
channel by pressing SOLO buttons on additional channels.
SEL buttons
The SEL buttons activate the associated channels in the
DAW software in order to perform a specific operation
(for example, when adjusting EQ with the ASSIGNABLE
ENCODERS, the SEL switch will be used to choose the
channel you want to adjust). When a channel is selected,
the associated SEL switch's red LED will light up.
3
4
8
5
7
6
2
1
6a
