17
Assigning MIDI functions with iMap
TM
iMap
TM
iConPad software panel
You can use iMap
TM
to easily assign the MIDI functions of
your iConPad. Please launch the iMap
TM
software.
Note:
if your iConPad is not connected to your Mac/PC,
the message “There are no MIDI input devices” will appear.
Please connect iConPad to your Mac/PC with the provided
USB cable.
Diagram 20
1. Control surface elements assignment
These elements include all the buttons, the knobs, the drum pads and the touch
faders. They are assigned by the lower four drop-down menus including “MIDI
Message type”, “Channel”, “MIDI Message” and “ Trigger mode”. To assign a
control, click on it to select (it will change to different color) and assign its midi
message with the aforementioned drop-down menus
Note:
Only “User defined mode” will allow you to assign
your own midi mapping to your iConpad’s controls.
However, it is quite complicated and unless you are really
familiar with your DAW’s MIDI message structure, we
recommended that you use the Mackie Control or HUI
mode which has already mapped the major functions, to
save you the trouble of doing all the mapping.
Layer
buttons
Drum Pads layer
buttons
Drum
pads
Buttons
Master
fader
Channel
faders
Knobs - Rotate
Knob – Enter
Diagram 21
Diagram 22
