4
iCON iProtect Instruction Manual Rev 4.4
5. Display
The iProtect display provides a real time indication of the operational mode and the
current state of the controller, including real-time voltage/load and any error messages.
Drainage
Boosting
Transfer
Control by floats
or probes
Control by pressure
switch
Control by floats
or probes
Control by level
transducer
Control by pressure
transducer
Control by level
transducer
Function switch located upper right-hand side of main board. Cycle power after changing.
Error
messages
display in the
RH pane
Voltage
Output
power
Transducer
values
Pump running status displays in the middle pane
Parameter configuration mode
Fault information displaying
Time information displaying
