5
Left 1/2" x 110mm Bolt (78)–1
Right 1/2" x 110mm Bolt (70)–1
M8 x 65mm Carriage Bolt (73)–4
M10 x 45mm Bolt (76)–4
M8 Locknut
(84)–4
M8 Acorn Nut
(82)–4
Right 1/2" Nut
(85)–1
Left 1/2" Nut
(86)–1
M10 Locknut
(83)–4
M8 x 65mm Bolt (75)–4
M8 x 20mm Hex
Screw (77)–2
M8 x 16mm
Screw (74)–6
Pivot Washer
(67)–2
M13 Washer
(69)–2
M5 x 12mm
Screw (80)–2
M4 x 16mm
Flange Screw
(95)–2
M8 Split
Washer
(90)–12
M10 Washer
(72)–4
M13 Wave
Washer (58)–2
M8 Curved
Washer (65)–18
Pivot Wave
Washer (57)–2
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if it has
been preassembled. Extra parts may be included.