background image

25

  HOW TO FOLD THE TREADMILL

To avoid damaging the treadmill, adjust the incline 
to zero before you fold the treadmill. Then, remove 
the key and unplug the power cord. CAUTION: You 
must be able to safely lift 45 lbs. (20 kg) to raise, 
lower, or move the treadmill.

1.    Hold the metal frame (A) firmly in the location 

shown by the arrow below. 

CAUTION: Do not hold 

the frame by the plastic foot rails. Bend your 
legs and keep your back straight as you raise 
the frame about halfway to the vertical position.

2.  

Hold the frame 

fi

 rmly with your right hand. Pull 

the latch knob (B) to the left and hold it. Raise the 
frame until the latch plate (C) is past the latch pin 
(D). Then, slowly release the latch knob; 

make 

sure that the latch plate is resting against the 
latch pin.

 To protect the floor or carpet, place a mat under the 
treadmill. Keep the treadmill out of direct sunlight. Do 
not leave the treadmill in the storage position in tem-
peratures above 85°F (30°C).

HOW TO MOVE THE TREADMILL

Before moving the treadmill, fold it as described at 
the left. 

CAUTION:  Make sure that the latch plate is 

resting against the latch pin. Moving the treadmill 
may require two people.

1.    Hold the frame (A) and one of the handrails (E), 

and place one foot against a wheel (F).

2.     Pull back on the handrail until the treadmill will roll 

on the wheels, and carefully move it to the desired 
location. 

CAUTION: Do not move the tread-

mill without tipping it back, do not pull on the 
frame, and do not move the treadmill over an 
uneven surface.

3.    Place one foot against a wheel, and carefully lower 

the treadmill.

HOW TO LOWER THE TREADMILL FOR USE

1.  

See drawing 2. 

Hold the upper end of the treadmill 

with your right hand. Pull the latch knob to the left 
and hold it. Next, lower the frame until it is past 
the latch pin. Make sure that the pin does not hit 
against the foot rail. Then, release the latch knob.

2.  

See drawing 1 at the left. 

Hold the metal frame 

fi

 rmly with both hands, and lower it to the 

fl

 oor. 

CAUTION: Do not hold the frame by the plastic 
foot rails, and do not drop the frame. Bend your 
legs and keep your back straight.

 

1

A

2

Engaged

C

D

B

B

E

A

F

1

 HOW TO FOLD AND MOVE THE TREADMILL

Summary of Contents for PFTL60916.5





































Reviews: