background image

Page 8 

 

Guarantee 

(UK  only)  This  amplifier  is  guaranteed  by  your 
dealer  for  12  months  from  the  date  of  purchase 
for  parts  and  labour,  excluding  shipping.  Valves 
are  consumables  and  therefore  on  a  12  months 
pro-rata wear basis. 
Other  countries  may  vary,  ask  your  re-seller. 
Please  keep  your  receipt  as  proof  of  purchase, 
this may be needed.  

 

In  the  event  of  any  difficulty  you  are  welcome  to 
contact us. 

 

Exclusions 

Claims for any  damage to  either amplifiers or valves 
must be reported within three days of receipt. 

 

This  amplifier  is  designed  for  normal  domestic  hi  fi 
use.  It  is  not  guaranteed  for  commercial,  Public 
Address  use,  or  use  in  other  situations.  The 
guarantee  becomes  void  if  the  unit  has  been 
modified in any way not approved by Icon Audio. 

 

Future service and spares 

Your  dealer  should  be  able  to  provide  any  support 
you need. Or you are welcome to contact for advice, 
spares and repairs. 

 

We  expect  our  amplifiers  to  give  a  service  life  of 
approximately  20  years,  with  regular  maintenance. 
During  this  time  we  will  make  every  effort  to  supply 
spare parts and repair them at an economical cost. 
Supply  is  subject  to  availability  from  third  party 
suppliers  which  Icon  Audio  is  not  responsible  for. 
This  does  not  cover  unique  parts  including  remote 
control systems, meters and cosmetic parts. 

 

If  you  believe  the  unit  is  not  functioning  correctly,  it 
may be helpful to contact us first as we may be able 

to assist you. Then we would request that you return 
the item to us for further action. 

 

You  are  advised  to  inform  us  of  any  change  of 
address in order that we may keep you up to date of 
any upgrades or improvements. Check our website. 

 

Returning for service 

Should your amplifier need service in the UK return it 
to  the  address  below  with  a  description  of  the 
problem. 
Outside  the  UK  contact  your  dealer/distributor.  In 
case of difficulty email us at the address below. 

 

8 Packing Instructions 

It is essential that the original box and packing be 
kept  in  good  condition,  as  this  provides  vital 
protection  during  transit.  Please  do  not  write  on 
box,  but  use  removable  labels.

  If  returning  for 

service  do  not  send  the  cover,  as  this  is  easily 
damaged.  The  valve  cover  is  normally  supplied  in  a 
separate  box  with  the  valves. 

We  recommend  that 

the  cover  be  sent  separately  as  rough  handling 
can damage both cover and amplifier. 

 

 

 

Re-use  the  supplied  plastic  bag  to  keep  the 
amp clean and free from damp. 

 

The  mains  lead  and  remote  control  fits  in  a 
foam cut-out underneath the amplifier. 

 

Valves  should  be  removed,  numbered  and 
packed  in  “Bubblewrap”  or  similar  for 
protection inside the valve cover.  

 

If  the  amplifier  is  stored  in  the  box,  keep 
upright  and  remove  batteries  from  remote 
control to prevent corrosion. 

 
 

 

icon Audio 

(UK) Ltd

 

351 Aylestone Road Leicester  LE2 8TA 

Email: [email protected]   www.iconaudio.com 

Phone +44 (0) 116 244 0593  +44 (0) 7787 158791 

 

Gen  15/01/2019 
 

Summary of Contents for Stereo 30se









Reviews: