5
BRidgE ConnECtion SEttingS
5-13
Bridge Connection screen
Bridge Connection Settings > Bridge Connection
■
AMBE+2 Vocoder Assignment
Assigns the Voice Protocol and the AMBE+2 Vocoder to each port.
1
Port Name �������
Lists the transceiver port of the RoiP gateway. Click to open to the
Connection Port Settings screen of the port.
L
the Converter Bridge setting screen (PBX extension > Converter Bridge) is
displayed when a converter bridge‘s port name is clicked.
2
Route Setting Screen ��
the screen setting the route of the destination is displayed.
When the entry is set as a combination by the bridge connection,
“Bridge Connection” is displayed. otherwise, “destination Settings” is
displayed.
L
Click the “destination Settings” link to open the destination Settings screen.
3
Voice Protocol (For Custom
Bridge Connection) ���
displayed only when the Bridge Connection destination (see above on
this setting screen) is set to “Custom Bridge Connection.”
Set the voice protocol for the custom bridge connection to “g.711u,”
“Bridge Protocol,” or “AMBE+2.”
4
5
1
2
3
