5
BRidgE ConnECtion SEttingS
5-2
■
Bridge Connection
Sets the transceiver port bridge connection combination.
L
the transceiver port assigned as a bridge connection source or a destination is no longer usable as a call
destination.
L
the EXt 1 and MiC ports are not usable at the same time. the EXt 1 port is disabled while a microphone is connected
to the MiC port on the front panel.
Bridge Connection Settings > Bridge Connection
Bridge Connection screen
1
Bridge Connection Source �
Select the port for the bridge connection.
2
Bridge connection Destination
Select the destination port for the bridge connection.
L
only the ports that can be connected to the source port (
1
) are listed in this
setting.
Multicast mode
3
8
9
10
Unicast mode
1
2
3
4
5
6
7
9
10
L
the above example shows when the Bridge Connection destination (
2
) is set to “Custom Bridge Connection.”
1
2
9
10
L
the above example shows when the Bridge Connection destination (
2
) is set to “digital transceiver 2 (d-tRX2).”
NOTE:
When you set a combination of a digital transceiver and an analog transceiver (EXt(i/o) Port,)
enter [AMBE+2 Vocoder Assignment] settings below on the same screen.