9
ExPERT SETTINGS
9-3
Abnormal Condition Monitoring screen
■
LAN Port Link-down
Set the monitor function for a communication error.
Expert Settings > Abnormal Condition Monitoring
1
2
1
Monitoring �������
Select whether or not to detect a RoIP gatewayʼs LAN port connection
error. When an error is detected, it is displayed on the “SYSLOG”
screen, as shown below.
(Information > SYSLOG >SYSLOG)
(Default: Disable)
2
Control Output
�����
Displayed only when Monitoring (
1
) is set to “Enable.”
Select whether or not to short the B1/B2 terminal (+/–) to output an
error detect signal.
(Default: Disable)
Select a port if you want to enable the output control.
L
When enabling the output, confirm Switch Control of the port, that you want
to output the error detect signal to, is set to “Relay Circuit.”
( Connection Port Settings > ExT I/O (ExT) > ExT Output Settings >
Switching Control)
L
The screen shows when Monitoring (
1
) is set to “Enable.”
