8
DESTINATIoN SETTINGS
8-4
SelCall Number Converting screen
Destination Settings > SelCall Number Converting
1
Index ���������
The Index assigned for the entry.
(Default: 1)
Index range: 1 ~ 1000
2
Name ����������
Enter a name of up to 31 characters.
3
Call Type (Destination) ��
Select the type of call.
(Default: Individual)
•
Individual
: Virtually call a specified transceiver.
•
Group
: Virtually call all transceivers that belong to the specified group.
•
All
:
Call all transceivers.
4
Prefix ID (Destination) ��
Enter the SelCall prefix ID.
• Range: 0 ~ 30
5
ID (Destination) �����
Enter a provisionally assigned SelCall destination ID.
ID range differs, Depending on the system mode.
L
When “All” is selected in [Call Type (Destination)] (
3
), This item’s color
changes to gray, and you cannot change the setting.
6
Call Type (Convert Destination)
Select the call type.
(Default: Individual)
•
Individual
: Call only one transceiver.
•
Group
: Call all transceivers that belong to the specified group.
•
All
:
Call all transceivers.
7
Prefix ID (Convert Destination)
Enter the SelCall destination’s prefix ID.
• Range: 0 ~ 30
8
ID (Convert Destination) �
Enter the ID of the SelCall destination.
ID range differs, Depending on the system mode.
L
When “All” is selected in [Call Type (Destination)] (
3
), this item’s color
changes to gray, and you cannot change the setting.
9
<Add> ���������
Click to add the entry.
L
The registered contents are displayed on the [List of SelCall Number Converting
Entries] screen.
7
1
2
3
4
6
5
■
SelCall Number Converting
Even when a SelCall number is shared in several sites, you can call a radio in a different site by using the
provisionally assigned SellCall destination ID.
8
9
