3
NETwoRk SETTINgS
3-4
■
DHCP Server
Configure the DHCP Server function.
Network Settings > DHCP Server
DHCP Server screen
1
2
3
4
5
6
7
1
DHCP Server ������
Select “Enable” to use the DHCP Server function.
(Default: Disable)
The DHCP Sever is activated, depending on the IP Pool Start Address
(
2
) and Pool Size (
3
) items.
2
IP Pool Start Address ��
Enter the IP Pool Start address.
(Default: 192.168.0.10)
An IP address is automatically assigned to a transceiver that the RoIP
gateway connects to, from this IP Pool Start address.
3
Pool Size ��������
Entry the number of an IP address that can be automatically assigned.
(Default: 30)
Up to 128 addresses can be automatically assigned by the DHCP
server function. Another 32 addresses can be manually assigned.
4
Subnet Mask ������
Enter the subnet mask for the IP Pool Start address set in the “IP Pool
Start Address” (
2
).
(Default: 255.255.255.0)
5
Lease Time �������
Enter the lease time period.
(Default: 72)
Range: 1 ~ 9999 (hours)
6
Domain Name ������
Enter a network address domain name of up to 253 characters.
7
Default Gateway �����
Enter the default gateway IP address.
when the DHCP Server function is used, this IP address is sent to a
client.
L
when this item is blank, the RoIP gateway’s IP address is sent.
