7
CONNECTION PORT SETTINgS
7-51
Connection Port Settings > Emergency Notification
Emergency Notification screen
■
Bridge Communication
Edit the Emergency Notification settings for the transceivers connected by Bridge Mode.
3
4
1
2
5
6
1
Encryption
Select whether or not to enable the Encryption function.
(Default: Disable)
When you enable the function, enter an encryption key between 1 and
32767.
(Default: 1)
2
Default Callee ID
Select “Enable” to add the destination ID to the transmitted signal.
(Default: Disable)
3
Call Type
Select a call type.
(Default: group)
• Options: Individual, group, or All
4
Destination Prefix ID
Enter a destination prefix ID.
The ID may differ, depending on the
system.
(Default: Blank)
• Range: 0 ~30
5
Destination ID
Enter an Individual or group ID of the destination transceiver between 1
and 9999999.
(Default: 1)
L
Enter an ID between 00001 and 99999 when the Destination Prefix ID (
4
) is
entered.
6
Source ID
Enter a stationʼs source ID between 1 and 9999999. The ID is sent to
the destinations.
(Default: 1)
7
<Apply>
Click to apply the settings.
8
<Reset>
Click to reset the settings.
L
You cannot reset after clicking <Apply>.
7
8
L
3
~
6
Displayed only when the Default Callee ID (
2
) is set to “Enable.”
