7
CONNECTION PORT SETTINgS
7-36
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■
EXT Input Settings
Edit the input settings of the RoIP Gatewayʼs EXT1 ~ EXT4 ports.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
Encryption
Select whether or not to enable the Encryption function.
(Default: Disable)
When you enable the function, enter an encryption key between 1 and
32767.
(Default: 1)
2
Call Type
Select a call type.
(Default: group)
3
Destination Prefi x ID
Enter a destination prefi x ID.
The ID may differ, depending on the system.
(Default: Blank)
• Range: 0 ~30
4
Destination ID
Enter the default ID for the EXT port between 1 and 9999999.
(Default: 1)
L
Enter an ID between 00001 and 99999 when the Destination Prefi x ID (
3
) is
entered.
5
Source ID
Enter a stationʼs source ID between 1 and 9999999. The ID is sent to
the destinations.
(Default: EXT1=301, EXT2=302, EXT3=303, EXT4=304)
L
When EXT I/O Port Mode is set to “Separate,“ the default values are
EXT1=351, EXT2=352, EXT3=353, and EXT4=354.
L
1
~
5
are displayed only when “Connected Unit” is set to “EXT I/O Unit, and ”EXT I/O Port Mode” is set to
“Separate.” (Connection Port Settings > EXT I/O (EXT) )