7
CONNECTION PORT SETTINgS
7-27
EXT I/O (EXT) screen
Connection Port Settings > EXT I/O (EXT)
■
Bridge Communication
These items are displayed when “Transceiver” is selected as a connected unit.
(Connection Port Settings > EXT I/O (EXT) > EXT I/O Port Mode > EXT I/O 1 ~ 4 > Connected Unit)
(Connection Port Settings > EXT I/O (EXT) > EXT I/O > EXT I/O Port)
Edit the Bridge Communication settings for transceivers connected to the EXT1 ~ EXT4 ports.
These items are Displayed only when “Connection Unit” is set to “Transceiver.”
1
Encryption
Select whether or not to enable the Encryption function.
(Default: Disable)
When you enable the function, enter an encryption key between 1 and
32767.
(Default: 1)
2
TalkBack
Select whether or not to enable the TalkBack function. (Default: Enable)
When the function is enabled, Select the TalkBack time.
(Default: 5)
• Range: 1 ~ 10 (seconds)
3
Call Type
Select a call type.
(Default: group)
• Options: Individual, group, or All
4
Destination Prefix ID
Enter a destination prefix ID.
The ID may differ, depending on the
system.
(Default: Blank)
• Range: 0 ~ 30
5
Destination ID
Enter the default ID for the EXT port between 00001 and 9999999.
(Default: 1)
L
Enter an ID between 00001 and 99999 when the Destination Prefix ID (
4
) is
entered.
6
Source ID
Enter a stationʼs source ID between 1 and 9999999. The ID is sent to
the destinations.
(Default: EXT1=301, EXT2=302, EXT3=303, EXT4=304)
1
2
3
4
5
6
L
The above screen shows when Encryption (
1
) is set to “Enable.”
L
2
~
5
are not displayed when the Transceiver Model is set to “IC-SAT100.”