7
CONNECTION PORT SETTINgS
7-16
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■
DTMF Dialing
Edit the details on DTMF Dialing.
1
DTMF Dialing
Select “Enable” to use DTMF signaling.
If enabled, set the details in the Timer.
(Default: Disable)
2
Permissible Tone Gap
Select the period of time to detect that the last digit has been input.
(Default: 5)
• Range: 1~10 (seconds)
3
OFF-hook Detect Timer
Select the period of time to detect the OFF-hook control signal.
(Default: 400)
• Range: 0~2000 (milliseconds) in 100 millisecond steps
4
ON-hook Detect Timer
Select the period of time to detect the ON-hook control signal.
(Default: 400)
• Range: 0~2000 (milliseconds) in 100 millisecond steps
L
3
and
4
are the timers for the Transceiver Special Number. (PBX > Special Number > Transceiver Special Number)
3
4
1
2
L
The screen above shows when “DTMF Dialing” (
1
) is set to “Enable.”
