7
CONNECTION PORT SETTINgS
7-12
Digital Transceiver (D-TRX) screen
Connection Port Settings > Digital Transceiver (D-TRX)
■
Digital Transceiver Connection
System: dPMR Mode 2
Configure the digital transceiver to connect to the RoIP Gateway. You can connect maximum of 4 digital transceivers
through the network.
1
Connected Repeater’s Address
Enter the UC-FR5000’s IP address.
2
TCP Port Number
(Connection Port)
Enter the Connection Receive Port number that is set in the
UC-FR5000. Do not duplicate the other port number.
(Default: Digital Transceiver 1 (D-TRX1): 41200
Digital Transceiver 2 (D-TRX2): 41201
Digital Transceiver 3 (D-TRX3): 41202
Digital Transceiver 4 (D-TRX4): 41203)
• Range: 1 ~ 65535
3
UDP Port Number
(Data Port)
Enter the Data Receive Port number that is set in the UC-FR5000.
Do not duplicate the other port number.
(Default: Digital Transceiver 1 (D-TRX1): 41220
Digital Transceiver 2 (D-TRX2): 41221
Digital Transceiver 3 (D-TRX3): 41222
Digital Transceiver 4 (D-TRX4): 41223)
• Range: 1 ~ 65535
4
Connection Key Code
Enter the Key Code that is set in the UC-FR5000. (Default: ucfr5000)
3
11
12
10
9
8
7
6
5
4
1
2
L
The above screen shows an example for connecting the IC-FR5000 (with UC-FR5000 installed) to Digital
Transceiver 1 (D-TRX1).
L
The above screen shows when the Digital Frame Packet (
5
) and Scrambler (
11
) are set to “Enable,” and Specify
TX CC (
10
) is checked.
