5
MAINTENANCE
5-11
Automatic Restoring from a USB flash drive
■
About the file names
The files that are saved on a USB flash drive for the automatic restore function must be named as follows:
•
Settings file: savedata.sav
L
Only the settings file that is saved on the VE-PG4 setting screen can be used for the Automatic Restore function.
(Management > Settings Backup > Settings Backup)
•
Firmware:
firmware.dat
L
Use the downloaded firmware from the Icom web site.
Download the firmware file, extract it, and then rename the file to “firmware.dat”.
■
The settings backup files
When restoring the setting data from a USB flash drive to the RoIP Gateway, its original settings are
automatically saved as “bakdata.sav” onto the USB flash drive, as a backup.
The latest 11 backup files (revisions) are stored on the USB flash drive, as the file name “bakdata_X.sav”
(X=Revision number.)
(Example) The latest backup:
bakdata.sav (without a revision number)
The second backup: bakdata_1.sav
The third backup:
bakdata_2.sav
: :
The oldest (11th) backup
: bakdata_10.sav
L
If the content of the settings file is the same as the VE-PG4’s current settings, no setting backup file is saved.
L
The firmware is not backed up.
L
When a VE-PG4 setting is changed, the original settings are automatically saved onto the USB flash drive, if it is
inserted into the VE-PG4.
