3
WIRELESS LAN TRANSCEIVERS
3-6
Configuring the wireless LAN transceiver system
■
Checking the IP100H settings
After registering the IP100H to the RoIP Gateway, enter the required settings of the IP100H on the PC, using
the CS-IP100H cloning software.
After the settings on the CS-IP100H have been applied to the IP100H, restart the IP100H to connect to the
RoIP Gateway to receive the settings from it.
When the IP100H settings are successfully completed, the IP100H displays the standby screen.
Signal strength indicator
Displays the signal strength in three levels when your
communication terminal is in a service area.
: Blinks when you are in out of the service area.
: Displayed when your communication terminal is not registered,
or when not connected to a RoIP Gateway.
Call mode icon
Displays the current call mode.
The icon blinks when a call or a message is received.
: All or Group call
: Individual call
: Talkgroup call
: Telephone call
Area call function icon
Pocket Beep function icon
P-Bell function icon
Key lock function icon
Battery indicator
Booting...
0101
Connecting...
0101
Setting up...
0101
IP100H
Ver. .
/
Successful
0101
10/3 12:57
All
Version
information
Unit ID
Internal
microphone
Jack cover
Function display
[PWR/VOL]
knob
External antenna
[TX/RX] LED
[PTT] switch
[Option] key
Internal speaker
Function keys
10/3 12:57
All
10/3 12:57
Talkgroup
Talkgroup icon
10/3 12:57
All Gather imme
Blinks
Scrolls
The indicators on the IP100H screen
•Standby screen
•
When receiving a message
•Talkgroup screen
Standby screen