2
SETTING UP THE TRANSCEIVERS
2-20
The following illustration shows an example for connecting the optional HM-241
speaker
microphone
(Future
product)
to the VE-PG4.
L
Either of the [MIC] port on the front panel or [EXT1] port on the rear panel. When a speaker microphone is connected to
the [MIC] port, the [EXT1] port is disabled.
VE-PG4
(192.168.0.1)
[D-TRX1]
[LAN]
Icom Transceiver
Example: IC-F1100DT
Group ID 0006
[MIC]
Repeater B
IC-FR5000
(192.168.0.3)
Speaker
microphone
HM-241
CH5
ID 0311
ID 0001
ID 0002
P0
P1
P2
P3
P4
B2
B1
B
1
Open the Microphone (MIC) screen.
(Connection Port Settings > Microphone (MIC))
2
In [Bridge Communication], enter the call type, destination prefix ID (if required), and destination ID that
you want to call from the speaker microphone, and then confirm the own ID of the microphone is set.
Enter the same setting as the Destination ID for the
"Microphone (MIC)" in [List of Destination Setting Entries
(Individual Call)]
Enter
3
In [Voice Output Control], enter the output gain and the notice tone volume, and then click <Apply>.
q
Enter
w
Click
Connection Port Settings > Microphone (MIC)
Destination Settings > Destination Settings
Connecting the speaker microphone
(
☞
Continued on the next page)
