Icom SR-VPN1 Instruction Manual Download Page 24

Page: 24 / 143

IPsec Wizard

3-3

Step 2. About the setting items

The setting parameters differ, depending on the network connection method.

(This is an example.)

Tunnel name

The name of the VPN tunnel. (Up to 63 characters)

The address of the other SR-VPN1 (Site B)

Except Static IP–Dynamic IP

The WAN IP address or host name*

of the other SR-VPN1 (Site B).

Pre-Shared Key

The key which is shared with the other SR-VPN1 (Site B). (Up to 128 characters)

The LAN subnet (IP address or Subnet mask) of the other SR-VPN1 (Site B)

The LAN IP address for the network address and subnet mask of the other SR-VPN1 (Site B) .

Dynamic IP–Static IP

Dynamic IP–Dynamic IP

Type: KEYID/FQDN/USER-FQDN String: Up to 128 characters.

The ID of the other SR-VPN1 (Site B)

Static IP–Dynamic IP

Dynamic IP–Dynamic IP

Type: KEYID/FQDN/USER-FQDN String: Up to 128 characters.

*1: Optional
*2: When the dynamic WAN IP addresses are assigned to both SR-VPN1s, enter the host name of the other SR-

VPN1 (Site B).

• One or the other SR-VPN1 needs to be registered to the dynamic DNS server and obtain the host name.

If the SR-VPN1 (Site A) has been registered to the dynamic DNS server and is ready for the IPsec connec-

tion, leave the [Remote Address] item blank.

If the other SR-VPN1 (Site B) has obtained a host name, enter the name into the [Remote Address] item.

Example: Dynamic IP to Dynamic IP connection

SR-VPN1

Site A

Site B

IP Network

WAN IP address: Dynamic IP

LAN subnet:
192.168.1.0/24

Host name: XXXXXXXXXX.jp

Dynamic IP

ID: keyid_local
(KEYID)

Peer’s ID: keyid_remote
(KEYID)

Tunnel name

Dynamic DNS

server

Summary of Contents for SR-VPN1
















































































































































Search results

Summary of Contents for SR-VPN1

Reviews:

Related manuals for SR-VPN1

Brands by name

Popular brands

Icom SR-VPN1, Instruction Manual

Search results

Summary of Contents for SR-VPN1

Reviews:

Related manuals for SR-VPN1

Brands by name

Popular brands