Icom SR-VPN1 Instruction Manual Download Page 130 | Manualshive

Page: 130 / 143

background image

6

MAINTENANCE

6-9

(Continued on the next page.)

You can clone the SR-VPN1’s settings and firmware using a USB flash drive.

• See pages 6-12 to 6-16 for details.

About the USB flash drive:

• Before using the USB flash drive, save the content to a PC as the backup.
• The USB flash drive is not supplied. Purchase separately.
•  A USB flash drive such as one with biometric authentication, or one with password protection is not supported.
•  Turn OFF the SR-VPN1’s power before inserting or removing the USB flash drive, to prevent data corruption.
•  Either one of the USB slots accepts the USB flash drive, but insert only one USB flash drive at a time.
• Insert the USB flash drive securely.
•  NEVER remove the USB flash drive or turn OFF the SR-VPN1’s power, while transferring data. It will cause data

corruption, or damage the USB flash drive. While transferring data, the [MSG] LED blinks in orange.

• After the firmware updating is finished, check the firmware version on the setting screen to verify that the update

was correctly done.

• When importing setting data from the USB flash drive to the SR-VPN1, the originally programmed setting data is

automatically saved as “bakdata.sav” in the USB flash drive, as a backup.

• If both firmware and setting files are saved in a USB flash drive, the firmware and setting data are sequentially

updated.

Supported USB specification:

Interface:

USB2.0

Device:

USB flash drive (USB Mass Storage Class)

File format:

FAT16/FAT32 (exFAT and NTFS are not supported.)

Note: Some USB flash drives are not guaranteed.

5. About the Automatic Restore using a USB flash drive

«
...
128
129
130
131
132
...
»

Summary of Contents for SR-VPN1
















































































































































Reviews:

No comments

Related manuals for SR-VPN1

Brand: Wattle Pages: 6

Brand: Baicells Pages: 8

Brand: ZyXEL Communications Pages: 125

HomePlug AV Ethernet Bridge PLE0200

Brand: Abocom Pages: 2

IntroSpect Analyzer 2 Series

Brand: Aruba Pages: 5

Wisenet PRN-6400B4

Brand: Hanwha Techwin Pages: 14

PCH1 T P Series

Brand: Parker Pages: 107

Brand: Maipu Pages: 80

Brand: UHP Pages: 15

Brand: Ubiquiti Pages: 21

Hotwire 8775 MSDSL

Brand: Paradyne Pages: 10

Brand: Kaptia Pages: 14

Brand: XtendLan Pages: 52

Brand: Zoom Pages: 2

SmartRack SR42UBEXPKD

Brand: Tripp Lite Pages: 8

Brand: ATCOM Pages: 18

Brand: Tenda Pages: 74

Brand: MikroTik Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands