40
8
CONNECTIONS AND INSTALLATION
8
1
7
4
2
5
3
6
10
15
18
13
11
16
9
14
12
17
■
Connections
1
2
3
7
6
5 4
1
VHF ANTENNA CONNECTOR
Connects to a marine VHF antenna with a PL-259 connector.
A key element in the performance of any communication system is the antenna. Ask
your dealer about antennas and the best place to mount them.
CAUTION: DO NOT
transmit without an antenna.
2
NMEA 2000 CONNECTOR
Connects to the NMEA 2000 network.
Requirements of the external GPS:
•“GNSS RAIM Output” can be input using the RAIM function.
•The external GPS antenna must be installed within 26 m (85.3 ft) from the internal
GPS antenna.
3
NMEA 0183 CONNECTORS
Connects to a transceiver, plotter device, marine radar, external GPS receiver, or switch button.
L
See page 41 for the connector information.
Requirements of the external GPS:
•The datum of the external GPS receiver must be “WGS-84.”
•GBS sentence can be input using the RAIM function.
•The external GPS antenna must be installed within 26 m (85.3 ft) from the internal
GPS antenna.
4
GROUND TERMINAL
Connects to a vessel ground to prevent electrical shocks and interference from other
equipment occurring. Use a self tapping screw (3 × 6 mm: not supplied).
5
GPS ANTENNA CONNECTOR
Connects to the supplied GPS antenna.
L
See page 39 for the GPS antenna connection.
6
DC POWER CONNECTOR
Connects to a 12 or 24 V DC power source. (+: Red, –: Black)
7
DATA CONNECTOR
Connects to a PC using a USB cable (A - mini B type) to output the received AIS
messages, output GPS data, program the transponder, or update a firmware.
L
A USB cable (A - mini B type) is user supplied.
L
If the transponder is turned ON or OFF while communicating with an application software
on the PC, the PC software may not work normally. In that case, restart the PC software.
Summary of Contents for MA-510TR
Page 60: ......
Page 62: ...MEMO ...
Page 63: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO ...
