Icom MA-510TR Instruction Manual Download

Page: 45 / 64

MENU ITEMS

Configuration

Backlight

You can set the Backlight mode to Day

mode or Night mode.

See page 10 for details.

Key beep

You can select whether or not to sound a

beep when a key is pushed.

ON: A beep sounds when a key is pushed.

OFF: No beep sounds for silent operation.

Audible alarm

You can select whether or not to sound the

following alarms.

ON: The alarm sounds.

OFF: The alarm does not sound.

CPA/TCPA

The alarm for when the AIS target is

closer than the set CPA/TCPA values.

Received message

The alarm for when a message is

received.

Arrival

The alarm for when the vessel arrives at

or near the destination

XTE

The alarm for when the vessel goes off

course.

Others

The alarm except for the CPA/TCPA,

Received message, Arrival, and XTE

alarm.

Internal GPS SBAS

The SBAS (Satellite Based Augmentation

System) transmits signals to correct errors,

and improve accuracy and reliability in

data received from GPS satellites.

ON: This function is ON.

OFF: This function is OFF.

Unit

You can select the unit to display a

distance and speed.

NM, kn: “NM, kn” is used.

km, km/h: “km, km/h” is used.

Language

You can select the display language.

Select English, Indonesian, Spanish,

French, or Vietnamese.

AIS information

Own ship

Displays your vessel’s AIS information.

AIS messages

RX log

Displays the received messages.

“No message” is displayed when there

is no received message.

See page 23 for details.

Status

Displays your transponder’s current status

information.

Summary of Contents for MA-510TR

































































Search results

Summary of Contents for MA-510TR

Reviews:

Related manuals for MA-510TR

Brands by name

Popular brands

Icom MA-510TR, Instruction Manual

Search results

Summary of Contents for MA-510TR

Reviews:

Related manuals for MA-510TR

Brands by name

Popular brands