Icom MA-510TR Page 40 Instruction Manual Download

Page: 40 / 64

OTHER FUNCTIONS

■

Individual DSC call

(Possible only when a transceiver is connected.)

When a transceiver is connected to the transponder, you can transmit an Individual

DSC call without entering the vessel’s MMSI code, by simply selecting its AIS target and

the voice channel on the transponder. The transceiver will use the transponder’s data

information and make the DSC call on channel 70, and then wait for the target vessel to

acknowledge it. After receiving the acknowledgment ‘Able to comply,’ use the transceiver

to communicate with the target vessel on the predetermined voice channel.

The following transceivers can operate with this function. (As of November 2019)

IC-M605/IC-M605EURO/IC-M506/IC-M506GE/IC-M424G/IC-M400BB/

IC-M330/IC-M330GE/IC-M330G/IC-M220

See page 42 for connecting to the transceiver.

NOTE:

The data communication speed (baud rate) of NMEA1 must be set to 4800 bps

to send an Individual DSC call using the transponder.

1. Select an AIS target on the plotter display, Target,

Danger, or Friends list screen. (pp. 11, 16)

2. Push [ENT] to display the Menu window.

•The Menu window is displayed.

3. Select “Send DSC,” and then push [ENT].

•The “DSC TRANSMISSION” screen is displayed.

Push [▲] or [▼] to select a voice channel.

•Voice channels are already preset into the transponder

in the recommended order.

NOTE:

When a base station is selected in step 1, a

voice channel will be specified by the base station.

Therefore you cannot change the channel. The

transponder will display “Voice Channel is specified

by the Base station,” in this case.

5. Push [ENT] to make the Individual DSC call.

•“Transmitting individual call” is displayed.

If Channel 70 is busy, the transceiver stands by until

the channel becomes clear.

6. After making the Individual DSC call, “DSC

transmission completed.” is displayed.

•If the transceiver cannot make the call, “DSC

transmission failed.” is displayed.

7. Push [CLR] to return to the Main screen.

8. After receiving the acknowledgment from the AIS

target, use the transceiver to communicate. See the

transceiver’s manual for details.

Summary of Contents for MA-510TR

































































Search results

Summary of Contents for MA-510TR

Reviews:

Related manuals for MA-510TR

Brands by name

Popular brands

Icom MA-510TR, Instruction Manual

Search results

Summary of Contents for MA-510TR

Reviews:

Related manuals for MA-510TR

Brands by name

Popular brands