3
PANEL DESCRIPTION
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Function Display
1
STATUS INDICATOR
(p. 13)
•TX:
Displayed while transmitting.
•BUSY: Displayed while receiving, or the squelch is
open.
2
POWER INDICATOR
(p. 5, 6)
•25W: High power
•1W:
Low power
3
CHANNEL GROUP INDICATOR
(p. 10)
Displays the selected channel group, INT (International),
USA, CAN (Canada), ATIS, WX (Weather channel), or
DSC.
L
The selectable channels differ, depending on the version or
presetting.
L
When the WX-Alert is set to ON,
“ ” is displayed instead
of “WX.” (For only the USA version)
4
STATUS INDICATOR
•STBY: Standby mode.
•RT:
Displayed while in the Radio Telephone (RT) mode.
L
Returns to the Standby mode if no operation occurs
during the preset period of time.
5
GPS ICON
•Displayed when valid GPS position data is received.
•Blinks while no position data is received.
6
MAIL ICON
(p. 38)
•Displayed when there is an unread DSC message.
•Blinks until one of the called messages is read.
7
CHANNEL SWITCH ICON
(p. 42)
Displayed when the “CH Auto SW” is set to “Ignore after
10 sec.” or “Manual.”
8
LOCAL INDICATOR
Displayed when the RF Attenuation is ON. (For only the
USA and Australian versions)
9
FAVORITE CHANNEL
(p. 16)
Displayed when a Favorite channel is selected.
10
CALL CHANNEL
(p. 9)
Displayed when a Call channel is selected.
11
DUPLEX CHANNEL
Displayed when a Duplex channel is selected.
12
OPERATING CHANNEL NUMBER
(pp. 9, 14)
Displays the selected operating channel number.
L
“A” or “B” is displayed when a simplex channel is selected.
