4
ABOUT THE SETTING SCREEN
4-29
7. [RoIP Server Settings] Menu
[RoIP Server Settings]–[Area Call]
■
Area Setting
The Area call function limits the communication with the devices in the specified area.
When a WLAN transceiver makes an All call or Group call using the Area call function, it calls other WLAN
transceivers or IP100FSs in the same area.
L
If you want to use the Area call from an IP100FS, specify the area by selecting the desired access points.
1
5
2
3
4
(This is only an example.)
1
No. �����������
Select the number that is registered to the Area call.
L
Up to 20 calls can be registered.
2
Name ����������
Enter the area name. (Up to 31 characters)
3
BSSID ���������
Enter the 12 digit BSSID of the wireless access point in the area.
(Example: Sales and Accounts)
When several access points are added, they are recognized as one
area.
L
Up to 20 access points can be registered to the area.
4
<Apply> ��������
Click to apply the entries.
5
<Reset> ��������
Click to restore the settings.
L
You cannot restore after clicking <Apply>.
All call
Sales
Accounts
Parts
The settings of the “Transceiver Settings”
item are necessary to use the Area call
function for the each WLAN transceiver.
The WLAN transceiver makes All call in the area
Example: The wireless access points “Sales” and “Accounts” are registered in the same
area. The access point “Parts” is registered in the different area.
In that case, two WLAN transceivers in the same area receive the call, however,
the WLAN transceiver in the different area will not receive it.